72 11 033 Removing and Installing/Replacing Front Left or Right Seat Belt

72 11 033 Removing And Installing/Replacing Front Left Or Right Seat Belt







Necessary preliminary tasks:
- Remove trim panels for door pillar
- E70 only:
If necessary, remove air vent







Version with end fitting pretensioner only:

Necessary preliminary tasks:
- Remove outer cover

Release screw (1).
Tightening torque: 72 11 07AZ.
Remove lock washer.
Pull belt strap (2) out of end fitting pretensioner.







Move front seat upwards.
Release screw (1) on front seat.

Installation:
Replace screw.

Tightening torque: 72 11 02AZ.
Feed out belt anchor fitting (2).







Unfasten screws (2).
Tightening torque: 72 11 04AZ.
Remove seat belt guide loop.
Release screws (1).

Installation:
Replace screws (1).

Remove belt deflector.
Tightening torque: 72 11 5AZ.







Release screw (1).

Installation:
Replace screw.

Tightening torque: 72 11 01AZ.
Unlock inertia reel unit (2) and remove from B-pillar.

Installation:
Inertia reel unit is coded against incorrect installation (3).

�� :

' !R :