27 10 010 Removing and Installing Transfer Box ATC 700 (Automatic Transmission)

27 10 010 Removing and installing transfer box ATC 700 (automatic transmission) hybrid





Warning!
High-voltage system - danger to life!





Important!
Observe safety information for handling hybrid cars





Important!

After replacement, the "Repair" service function must be carried out with in the BMW diagnosis system.





Important!
After completing work, check gear oil level and top up if necessary.
Filler plug (1):
Tightening torque 27 00 11AZ.
Oil level up to filler edge of filler plug (1).
Use only the approved transmission oil.

Failure to comply with this requirement will result in serious damage to the transfer box!





Necessary preliminary tasks:
^ Remove automatic transmission





Release screws (1) and remove hybrid parking lock (DSM) (2).

Tightening torque 24 00 6AZ.





Release screw connection of transfer case.

Tightening torque 27 00 9AZ.

Remove transfer case.





Installation:
Pay attention to dowel pin (1).

Grease dowel pin (1).

Apply a thin coat of grease to splines.

Grease: WEICON ANTI-SEIZE.

#c :