24 12 650 Replacing Radial Seal For Drive Shaft (GA7AHSCD)

24 12 650 Replacing radial seal for drive shaft (GA7AHSCD)

Special tools required:





Important!
After completion of work, check transmission oil level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious damage to the transmission.





Necessary preliminary work:
^ Remove gearbox





Drive a hole into radial shaft seal (1) using a centre punch.

Important!
Do not use a drill as metal chips may result in transmission malfunction.

Thread special tool 23 0 490 into radial shaft seal (1).

Drive out radial shaft seal (1) with impact weight (2).





Installation note:
Coat sealing lips of new radial shaft seal with clean transmission oil.

Drive shaft seal firmly home with special tool 24 0 330.