18 32 605 Removing and Installing/Replacing Both Connecting Pipes on Catalytic Converter

18 32 605 Removing and installing both connecting pipes on catalytic converter (N63 hybrid)





Warning!
High-voltage system - danger to life!





Warning!
The following points must be strictly observed prior to starting work:
^ Observe safety instructions for handling with hybrid vehicles

Warning!

Scalding hazard!
Only perform this work after engine has cooled down.









Necessary preliminary tasks:
^ Remove exhaust system

Note:
Texts refer to and illustrations show the left side. Procedure on right side identical.

Release nuts (1).

Tightening torque 18 31 2AZ.

Note:





Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Installation:
Remove seal.

Clean sealing faces.

Replace seal.





Check exhaust system for leaks.