13 62 593 Removing and Installing/Replacing Pressure Sensor on Left Intake Plenum

13 62 593 Removing And Installing/Replacing Pressure Sensor On Left Intake Plenum (N63 Hybrid)







WARNING: High-voltage system - danger to life.







WARNING:
The following points must be strictly observed prior to starting work:
- De-energize the high-voltage system
- Observe safety instructions for handling with hybrid vehicles







Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove coolant expansion tank







Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 2AZ.
Pull pressure sensor (3) out of left intake manifold.







Installation:
Delete fault memory.