Data Link Connector: Service and Repair

61 13 ... Removing And Installing/Replacing OBD-II Socket

Special tools required:







Necessary preliminary tasks:
- Remove pedal assembly trim







Release screws (1).
Remove OBD II socket (2) from instrument panel carrier (3).







Remove OBD II socket cover (2) from OBD II socket (1).

Unlock slide plate (3) with a suitable tool in direction of arrow.

Insert special tool 61 0 315 into OBD-II socket (1) in the direction of the arrow and press out the associated flat spring contact (4). Press remaining flat spring contacts out of OBD-II socket (1) with special tool 61 0 315.

Installation:
Pay attention to pin assignment of OBD II socket (1).
Make sure flat spring contacts and slide plate (3) are correctly engaged and seated in OBD II socket (1).