31 11 001 Replacing Front Axle Carrier

31 11 001 Replacing front axle support





Warning!
High-voltage system - danger to life!





Warning!
The following points must be strictly observed prior to starting work:
^ Disconnect high-voltage system from power
^ Observe safety instructions for handling with hybrid vehicles





Important!
Before removing front axle carrier:

In order to avoid damage to lifting platform, perform weight compensation on vehicle.
Load spring strut domes with sand bags.





Necessary preliminary tasks:
^ Lower front axle support
^ Remove both lower control arms from front axle carrier
^ Remove both tension struts from front axle carrier





Remove both engine mounts from front axle carrier

Remove steering gear.

Take front axle carrier down and set down on a suitable surface.

Installation:
Use previous front axle carrier as a template for modifying or replacing small parts.





After installation:
^ Perform chassis alignment check

^ Carry out steering angle sensor adjustment
^ Teach in end stop software