24 31 564 Replacing Torque Converter Shaft Seal (GA8HP70Z)

24 31 564 Replacing torque converter shaft seal (GA8HP70Z)

Special tools required:





Important!
- Do not let skin come in contact with transmission oil and do not inhale transmission oil vapors.
- Wear protective gloves.
- Ensure adequate ventilation





Important!
After completion of work, check transmission oil level.
Use only approved transmission oil.

Failure to comply with this instruction will result in serious damage to the transmission.





Necessary preliminary work:
^ Remove torque converter.





Secure transmission with special tool 24 0 200 on assembly stand 00 1 450.

Note:
Read and comply with note on installation of transmission retaining bridge.





Pull out radial shaft seal (1) with special tools 24 1 420 and 13 5 250.





Oil sealing lip on radial shaft seal.

Drive in radial shaft seal (1) with special tool24 2 410 as far as it will go.