Rear Vision Camera: Service and Repair

66 53 020 Removing And Installing (Replacing) Reversing Camera







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Necessary preliminary work:
- Remove tailgate upper section trim panel







Release screws (1).
Disconnect plug connections (2) and carefully feed out reversing camera (3).
Tightening torque 66 53 1AZ.

Replacement:
Remove protective film from reversing camera lens.







Installation note:
Moisten gasket (1) slightly to facilitate installation.
Gasket (1) must be correctly seated in tailgate (2).







After installation:
- Calibrate reversing camera