27 21 030 Replacing Radial Shaft Seal For Front Axle Output (ATC 700)

27 21 030 Replacing radial shaft seal for front axle output (ATC 700)

Special tools required:





Important!
After completion of work, check transmission oil level.
Use only the approved gear oil in this transfer box.





Necessary preliminary tasks:
^ Remove front propeller shaft.





Remove protective cap (1) with a screwdriver.





Drive a hole into radial shaft seal (1) using a center punch (2).

Important!
Do not use a drill as drillings may result in transmission malfunction.





Screw in special tool 23 0 490.

Drive out radial shaft seal (1) with impact weight (2).





Drive in radial shaft seal with special tool 27 1 470.





Reassemble the vehicle.

Check oil level.

Check transmission for leaks.