27 21 010 Replacing Radial Shaft Seal For Drive Shaft (ATC 700)

27 21 010 Replacing radial shaft seal for drive shaft (ATC 700)

Special tools required:





Important!
After completing work, check gear oil level and top up if necessary.
Use only approved transmission oil for this transfer case.





Necessary preliminary tasks:
^ Remove transfer box





Drive a hole into radial shaft seal (1) using a center punch (2).

Important!
Do not use a drill as drillings may result in transmission malfunction.





Screw in special tool 23 0 490.

Drive out radial shaft seal (1) with impact weight (2).





Drive in radial shaft seal with special tool 27 1 460.





Reassemble the vehicle.

Check oil level.

Check transmission for leaks.