31 00 ... Front Axle + Steering: Wheel/Chassis Alignment Check Must Be Carried Out After the Following Work

31 00 ... Front axle + steering: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:
^ Release of following screw/bolt connections:
^ Steering gear to front axle carrier
^ Lower wishbone to front axle support
^ Track rod end to track rod

^ Replacement of following parts:
1. Front axle support
2. Steering gear
3. Swivel bearing
4. Track rod end
5. Lower control arm / rubber mount
6. Track rod
7. Gaiter (if the tie rod end has to be screwed off)