33 41 151 Replacing Left or Right Wheel Bearing on Rear Axle Shaft

33 41 151 Replacing left or right wheel bearing on rear axle shaft





Important!
Do not damage multipole impulse ring.





Necessary preliminary tasks:
^ Remove drive flange for rear axle shaft





Release screws.

Remove wheel bearing.

Installation:
Stick in screws again / replace.

Tightening torque 33 41 2AZ.





Installation:
Keep contact surface (2) of wheel bearing/wheel carrier clean and free from oil and grease.

Except when replacing: Recondition tapped holes (1).

Install new wheel bearing.





After installation:
^ Adjusting parking brake