33 55 021 Replacing Both Rubber Mounts For Anti-Roll Bar Mounting

33 55 021 Replacing both rubber mounts for stabilizer mounting





Necessary preliminary tasks:
^ Remove stabilizer from rear axle carrier





Important!
Circo(R) Light must not be used between stabilizer and rubber mount!





Remove retaining bracket (1) and rubber mount (2) from stabilizer.

Installation:
Coat rubber mount with Circo(R) Light to install retaining bracket.





Installation:
Keep stabilizer clean and free of oil and grease.

Mount rubber mount (1) by way of slot (2) as pictured on stabilizer.