72 11 092 Removing and Installing/Replacing Rear Left or Right Seat Belts

72 11 092 Removing And Installing/Replacing Rear Left Or Right Seat Belt







Necessary preliminary tasks:
- Remove rear seat
- Remove panel for roof pillar







Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use







Release screw (1) on anchor fitting.

Installation:
Replace screw.

Tightening torque: 72 11 21AZ.

Installation:
End fitting is coded against incorrect assembly.







Release screw (1).

Installation:
Replace screw.

Tightening torque: 72 11 20AZ.
Remove inertia reel mechanism (2).

Installation:
Automatic reel (2) is encoded against incorrect installation.

�� :

' !R :