67 66 010 Removing and Installing/Replacing Lumbar Support Drive Mechanism on Front Seat, Left or Right

67 66 010 Removing And Installing/Replacing Lumbar Support Drive Mechanism On Front Seat, Left Or Right







Necessary preliminary tasks:
- Remove rear panel on front seat backrest







Unhook cover (1) in areas (2).







Disconnect plug connection (1).
Release clips (2).
Feed out drive unit for lumbar support (3) in upward direction.

Installation:
If necessary, replace faulty clips (2).







Release cable tie (1) from jacket (2).
Feed out drive unit for lumbar support out of jacket (2).
Detach hose (3).

NOTE: Gently heat hose (3) if stuck.

Installation:
Make sure hose (3) is laid without kinks.