65 12 071 Removing and Installing/Replacing Amplifier

65 12 071 Removing And Installing Or Replacing Amplifier







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







NOTE: Comply with notes and instructions on handling optical fibres.







Necessary preliminary work:
- Only disconnectE72:both negative battery cables
- Clamp off negative battery cable
- Remove flap in luggage compartment trim panel on left







NOTE: For purposes of clarity, graphic shows luggage compartment side trim panel removed.

Release screw (1).
Disconnect plug connection (2) and slide amplifier (3) in direction of arrow out of bracket.







Installation note:
Tabs on amplifier must be correctly pushed into guides (1) on bracket.
Check that amplifier is firmly seated.







Replacement:
For vehicle with production date up to 09/2010, carry out conversion in the diagnosis system via path:
- Vehicle
- Conversions
- Conversion hi-fi system

NOTE: On vehicle with production date after 09/2010, no vehicle programming / encoding needs to be carried out.