65 50 160 Removing and Installing/Replacing Trim For Rear Cabin Monitor Display At Front and Rear

65 50 160 Removing And Installing/Replacing Trim For Rear Cabin Monitor Display At Front And Rear

Special tools required:







IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in colour.







Unclip trims (1) on both sides with special tool 00 9 340.

Installation:
Make sure trims (1) are securely seated in rear cabin monitor trim at front.







Release screws (1).
Tightening torque 65 52 2AZ.







Unclip trim for display at rear (1) with special tool 00 9 340 and remove.







Release screws (1).
Carefully remove trim for display at front (2) and disconnect plug connection (3).

Installation:
Make sure ribbon cable is securely seated.