61 31 192 Replacing Knob For Controller (Without M-Models, Until 10/2009)

61 31 192 Replacing Knob For Controller (Without M-models, Until 10/2009)

Special tools required:







IMPORTANT:
Risk of damage.
Prior to removal, it is essential to determine whether a controller with a version before or after Life Cycle Impulse (LCI) is fitted.







NOTE: The number of buttons and shape of controller can vary depending on vehicle type.

Before LCI: Controller (1) has buttons on bottom only.
After LCI: Controller (2) has buttons top and bottom.
Knob may be removed from controller (1) only.

NOTE: These repair instructions described the removal of the knob from controller (1).







Pry off knob for controller (1) with special tool 00 9 323 and 00 9 317 in direction of arrow and remove.







IMPORTANT:
Risk of damage.
Fit knob for controller only when controller is installed.







Installation:
Fit knob for controller (1) so that guides (2) are seated in recesses (3).