11 33 052 Removing and Installing/Replacing All Rocker Arms on Left Side

11 33 052 Removing and installing/replacing all rocker arms on left side (S63)

Special tools required:

(cylinder bank 5 to 8)





Necessary preliminary tasks:
^ Remove left inlet camshaft.
^ Remove left exhaust camshaft.





Important!
Used rocker arms (1) may only be reused in the same position.
Tolerance classes are not required.

Remove rocker arm (1) and set down in a tidy and orderly fashion in special tool 11 4 480.

Install rocker arm (1).

Align all rocker arms (1) straight.





Assemble engine.