12 51 150 Removing and Installing/Replacing Wiring Harness Section For Fuel Injectors on Left or Right

12 51 150 - Removing and installing/replacing wiring harness section for fuel injectors on left or right (N62TU)





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove intake filter housing Service and Repair

Note:
The procedure is identical for both sides.
Illustrations show and descriptions refer to the left side.





Release screws and remove holder (1).
Pull ignition coil covers (2) out of rubber grommets.





Release screws.
Unlock plug (1) and remove.
Remove servomotor for eccentric shaft
Unlock plugs on fuel injectors and disconnect.
Remove wiring harness.





Check function of DME.