Pivot Bearing Trim (40 Percent Rear Seat)

52 26 ... - Removing and installing pivot bearing trim (40 % rear seat)





Necessary preliminary tasks:
- Remove middle slide trim at top only
- Remove inner follower trim Inner Follower Trim
- Partially remove backrest cover Backrest Cover For Right Rear Seat





Release screws (1).





Release screw (1).
Tightening torque: 52 26 27AZ 52 26 Rear Seats (Through-Loading System).
Unclip trim (2) in marked area.
Carefully tighten follower (3) on seat cushion frame.
Feed trim (2) out of seat mechanism.