Removing and Replacing A/C Compressor Drive Belt, M57 Diesel

11 28 050 Removing and installing/replacing the drive belt (elastobelt) for the air conditioning compressor (M57T2-SCR)

Special tools required:





Necessary preliminary work:
^ Remove fan cowl.





Crank engine in direction of engine rotation.

At the same time, pull off drive belt (2) towards front in direction of arrow using a clean cloth (1).

Remove drive belt (1) towards front.





While turning, push special tool (2) 11 0 332 onto special tool (1) 11 0 331.





Fit drive belt (1) on air conditioning compressor.

Draw drive belt (1) with special tools 11 0 331 and 11 0 332 onto belt pulley in direction of arrow.

Installation Note:
Check installation position of drive belt.





Assemble engine.