Harmonic Balancer - Crankshaft Pulley: Service and Repair

11 23 010 Removing and installing/renewing vibration damper (M57T2-SCR)

Special tools required:





Necessary preliminary work:
^ Remove fan cowl
^ Remove alternator drive belt

Move special tool 11 8 183 to gearbox (HP 26).





Detach exhaust bracket (1) from gearbox.

Fit special tool 11 8 183 and 11 8 182 at gearbox bolts(2) anbauen.

Adjust special tool 11 8 182 at flywheel spline (3).





Release screws (1).

Remove vibration damper (2).

Tightening torque 11 23 2AZ.

Installation Note:
Replace screws.

Tighten screws crosswise.