51 12 201 Replacing Rear Left Or Right Bumper Side Section

51 12 201 - Replacing rear left or right bumper side section





Necessary preliminary tasks:
- Remove left or right rear light
- Remove left or right rear reflector
- Partially detach rear wheel arch trim





Release screws (1).





Release screws (1).
Release side bumper trim (3) at catches (4).
Release screw (2) underneath.





Unclip side section (1) from (A) to (B) by pulling.

Installation:
Catches on side section and bracket must not be damaged.
Clip in side section first at rear (B) and then at side (A).