65 50 160 Removing and Installing/Replacing Trim For Rear Cabin Monitor Display At Front and Rear

65 50 160 Removing And Installing/replacing Trim For Rear Cabin Monitor Display At Front And Rear

Special tools required:







IMPORTANT: Trims may only be replaced in pairs so as to avoid differences in colour.







Unclip trims (1) on both sides with special tool 00 9 340 .

Installation:
Make sure trims (1) are securely seated in rear cabin monitor trim at front.







Release screws (1).
Tightening torque 65 52 2AZ .







Unclip trim for display at rear (1) with special tool 00 9 340 and remove.







Release screws (1).
Carefully remove trim for display at front (2) and disconnect plug connection (3).

Installation:
Make sure ribbon cable is securely seated.