Removing and Installing/Replacing Drive Unit For Seat Height Adjustment

67 31 520 Removing And Installing/replacing Drive Unit For Seat Height Adjustment







Necessary preliminary tasks:
- Remove front seat
- Remove outer cover on front seat







Set down front seat sideways on a suitable surface.
Disconnect plug connection (1).
Unfasten screws (2).
Tightening torque 67 31 1AZ .
Feed out drive unit for seat height adjustment (3) and remove.







Installation:
Fit drive unit for seat height adjustment (1) with plastic clip (2) only.
Make sure plastic clip (2) is correctly seated.







Replacement:
Initialize drive unit for seat height adjustment.