Sunroof / Moonroof Cable: Service and Repair

54 10 ... Removing And Installing/Replacing Drive Cable Plate







Also comply with the interactive 3D instructions for the removal and installation of the drive cable plate. It does not replace but enhance the applicable repair instructions.
- 3D animation mechanism glass slide/tilt sunroof cover







Necessary preliminary work:
- Remove mechanism for glass cover at front

Overview of glass lid mechanism:













If necessary, remove drive wedge (1).
If necessary, slide drive cable plate (2) towards rear and remove from guide rail.







IMPORTANT:
Risk of damage when installing drive cable plate
The rear drive cable plate (2) must be engaged before the front drive cable plate (1) is installed.
Incorrect setting can be identified from spring position and lever position (marked area).
Check engagement of rear drive cable plate (2) in guide rail.
Slide in drive cable plate (1).







Installation note:
Observe grease instructions for replacement parts.