P2127

2B06 - P2127

Information saved in
DME

Fault code
2B06 - P2127

Fault text
Pedal-travel sensor 2

Fault description


Condition for fault identification
Test condition:
No errors + Terminal 15 off => terminate emergency
program
Terminal condition: none
Voltage condition:
none

Condition for fault memory entry
Measured value <=
K_PWG1_DIAG_Min: 2

Action in service
1. Check plug and wiring harness on pedal-travel sensor and
at DME
2. Replace accelerator pedal module

Fault effect and breakdown warning
High idle speed / display for engine rpm limited to 5000 rpm
/ Check Control message / power reduction / MIL lights up
after engine runs 2X

Driver information
Warning light:
29-Engine malfunction

Service instruction
none