2AF8 - P1606 (DME)

2AF8 - P1606

Information saved in
DME

Fault code
2AF8 - P1606

Fault text
Internal fault within control module

Fault description


Condition for fault identification
Test condition:
Processor communications OK
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
DTC has been entered in ECU

Action in service
1. Delete stored DTCs from error memory,
2. if error is still present replace the DME.

Fault effect and breakdown warning
Power reduction / engine rpm limit display / Check Control
message

Driver information
Warning light:
Yes

Service instruction
none