2B29 - P16B7 (DME)

2B29 - P16B7

Information saved in
DME

Fault code
2B29 - P16B7

Fault text
Torque manager monitoring

Fault description


Condition for fault identification
Test condition:
Engine running
Terminal condition: Terminal 15
Voltage condition:
none

Condition for fault memory entry
Target torques greater than K_MD_SK_IND_Max

Action in service
1. Delete stored DTCs from error memory
2. Update DME
3. Replace DME

Fault effect and breakdown warning
Engine speed limited to 8250 rpm / Check Control message /
power reduction / MIL comes on after engine runs 2x

Driver information
Warning light:
No

Service instruction
none