Condition For Fault Memory Entry - Max_SCH

2B0F - P0700

Information saved in
DME

Fault code
2B0F - P0700

Fault text
SMG shift sequence monitoring

Fault description


Condition for fault identification
Test condition:
Shifting active
Terminal condition: Terminal 87
Voltage condition:
none

Condition for fault memory entry
smg_sk_t_phase > K_SMG_SK_T_PHASE_Max_SCH

Action in service
1. Read out DTCs from SMG ECU and then delete / 2. Read
out DTCs from DME ECU and then delete / 3. Use vehicle
tester to repair all active component errors (in DME ECU
and SMG ECU) / 4. If DTC is entered again: Use vehicle
tester to repair CAN error

Fault effect and breakdown warning
Execution of gearshifts is not completed or is rough / Check
Control message / engine rpm limitation displayed / power
reduction

Driver information
Warning light:
Yes

Service instruction
none