2B0D - P152C (DME)

2B0D - P152C

Information saved in
DME

Fault code
2B0D - P152C

Fault text
Bank 1 idle-actuator monitoring system

Fault description


Condition for fault identification
Test condition:
(egas_can_ed_tsperr_lls == 0) and CAN OK
Terminal condition: Terminal 87
Voltage condition:
ub > K_EGAS_CAN_ED_Plus_Min

Condition for fault memory entry
Difference too large

Action in service
1. Delete stored DTCs from error memory, idle actuator
system test
2. Check power supply to idle actuator 1
3. Replace idle actuator 1

Fault effect and breakdown warning
DSC lamp / CC message / engine speed limited to 5000 rpm
/ reduced power / engine start may be possible only with use
of accelerator pedal

Driver information
Warning light:
29-Engine malfunction

Service instruction
none