51 16 405 Removing and Installing/Replacing Roller Sun Blind on Side Window of Left or Right Rear Door

51 16 405 - Removing and installing/replacing roller sun blind on side window of left or right rear door





Necessary preliminary tasks:
- Remove rear door trim panel Removing and Installing Left or Right Rear Door Trim Panel





Carefully release catches (1) and remove roller sun blind (2) in direction of arrow.

Installation:
Make sure catches (1) are correctly seated.





Fold up handle (1) and feed out with roller sun blind (2) through frame (3).






Installation:
Guides (1) must not be damaged.
Roller sun blind must be correctly inserted in guides (1).





Replacement up to build date 06/2005:

Note:
Because there are visual differences between the old and new build dates, it is necessary to replaced the left and right roller sun blinds.
When installing roller sun blind in door trim panel (build date up to 06/2005), disconnect blocking finger (1) from roller sun blind (2) and door trim panel (3).





Replacement:
Remove clip (2) before fitting sun roller blind (1).