51 46 007 Replacing Panel For Rear Window Shelf (Parcel Shelf)

51 46 007 - Replacing panel for rear window shelf (parcel shelf)





Necessary preliminary tasks:
- Remove panel for rear window shelf 51 46 001 Removing and Installing Panel For Rear Window Shelf (Parcel Shelf)
Specification with tweeter/treble speaker:
- Remove left/right tweeter 65 13 195 Removing and Installing/Replacing Rear Treble Speaker (In Rear Shelf)





Specification with roller sun blind:
Remove trims (1).
Press roller sun blind (2) together at (A) in direction of arrow and press through from (A) to (B).
Remove roller sun blind (2) towards bottom.





Specification with through-loading system:
Release nut (1) on underside of rear window shelf (2) and remove cap (3).





Remove insulating mat in area "A" on underside of new panel (1).

Note:
Insulating mat is perforated in area "A".

Cut out opening (3) at moulding (2).

Drill areas "B" of opening (3) with 8 mm dia. drill bit and cut out remaining material at moulding (2) with a scalpel.

Important!
Ensure a clean cut so that the panel material (1) is not damaged.





Specification with Top Tether eyelets for child seat:
Remove insulating mat in area "A" on underside of new panel (1).

Note:
Insulating mat is perforated in areas "A".

Cut out opening (3) at moulding (2) with a scalpel.

Important!
Ensure a clean cut so that the panel material (1) is not damaged.