Underbody Cover: Service and Repair

51 71 447 Removing and installing/replacing trim for cover on left or right side member (up to 09/08)







Necessary preliminary tasks:
- Detach wheel arch cover from front/rear side member cover







Release screws (1).







Unclip panel (1) at holders (2) in direction of arrow and remove.







Installation:
Before installation, soak holders (1) in water.
If necessary, detach holders (1) from body and fit on panel (3).
If necessary, detach grommets (2) from holders (1) and place on body.
If necessary, replace faulty holders (1) and grommets (2).