U1184

CD8486 - U1184

Information saved in
DME

Fault code
CD8486 - U1184

Fault text
none

Fault description
The diagnostic function monitors PT CAN 2.

Condition for fault identification
Test condition:
The fault is recognized when a short circuit is present.
Potential problem source(s):
- Defective PT CAN 2
Terminal condition: Terminal 15
Voltage condition:
- Electrical system voltage > 10 V
Temperature condition:
- None
Time condition:
- 750 sec.
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 0.03 sec.

Action in service
- Check PT CAN 2

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: off

Service instruction
- none