P119B

104402 - P119B

Information saved in
DME

Fault code
104402 - P119B

Fault text
Absolute pressure sensor, intake pipe: Short circuit to earth

Fault description
The diagnostic function monitors the lower voltage limit of
the differential pressure sensor.

Condition for fault identification
Test condition:
The fault is recognized when the sensor voltage is < 0.16 V.
Potential problem source(s):
- Fault in wiring harness between sensor and DME
- Sensor defective
- Defective DME
Terminal condition: Terminal 15
Voltage condition:
None
Temperature condition:
None
Time condition:
- None
Other conditions:
Engine on

Condition for fault memory entry
0.5 sec.

Action in service
- Visual examination of plug-in contacts (at component and
DME ends) Measure sensor wire, power supply and ground
- Replace sensor
- Replace DME

Fault effect and breakdown warning
Breakdown notice:
None
Possible apparent symptoms:
Engine runs roughly

Driver information
Warning light:
MY10:
- ECE emissions warning lamp: off
- ECE electronic engine power reduction: off
- CC message: none
MY11:
- ECE emissions warning lamp: off
- US emissions warning lamp: on
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: One

Service instruction
None