P0336

160002 - P0336

Information saved in
DME

Fault code
160002 - P0336

Fault text
Crankshaft sensor, signal: implausible

Fault description
The diagnostic function monitors whether the signal from
the crankshaft sensor is being received with interruptions.

Condition for fault identification
Test condition:
The fault is recognized when the signals from the crankshaft
sensor are being received with interruptions.
Potential problem source(s):
- Defect in wiring harness
- Crankshaft sensor defective
- Crankshaft sensor in incorrect position
Terminal condition: none
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- None
Other conditions:
- Engine on

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Check wiring harness
- Inspect installation of crankshaft sensor
- Replace crankshaft sensor

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- Reduced power

Driver information
Warning light:
- ECE emissions warning lamp: on
- US emissions warning lamp: on
- ECE electronic engine power reduction: on
- US electronic engine power reduction: on
- CC message: none

Service instruction
- none