114202 - P029E (DME)

114202 - P029E

Information saved in
DME

Fault code
114202 - P029E

Fault text
Cylinder equalization above irregular running, cylinder 2:
maximum diagnosis limit reached

Fault description
Data content defined

Condition for fault identification
Test condition:
none
Potential problem source(s):
none
Terminal condition: none
Voltage condition:
None
Temperature condition:
- None
Time condition:
None
Other conditions:
- None

Condition for fault memory entry
none

Action in service
Injector replacement, compression test, teflon ring analysis
(a defective teflon ring will cause obvious soot accumulation
on the ignition coil adjacent to the plug, caused by escaping
exhaust gas), test of exhaust back-pressure

Fault effect and breakdown warning
Breakdown notice:
- None
Possible apparent symptoms:
- None

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- Data configured