1C4102

1C4102 - P250F

Information saved in
DME

Fault code
1C4102 - P250F

Fault text
Engine-oil level: too low

Fault description
The diagnostic function monitors the engine oil level.

Condition for fault identification
Test condition:
The fault is recognized when the oil level is too low.
Potential problem source(s):
- Insufficient engine oil
Terminal condition: Terminal 15
Voltage condition:
- Electrical system voltage > 9V
Temperature condition:
- None
Time condition:
- Roughly 2.5 min. after engine start
Other conditions:
- None

Condition for fault memory entry
This fault is logged in the control module's fault memory
immediately.

Action in service
- Add 1 liter of engine oil

Fault effect and breakdown warning
Breakdown notice:
- Add 1 liter of engine oil
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: CC message 'Engine oil level! '

Service instruction
- Data configured