Manufacturer Code Charts: 142002

142002 - P0313

Information saved in
DME

Fault code
142002 - P0313

Fault text
Misfire: tank fill level too low

Fault description
The diagnostic function monitors the duration of the
combustion strokes by processing the rpm signals.

Condition for fault identification
Test condition:
The fault is recognized when one combustion stroke is too
slow owing to combustion miss.
Potential problem source(s):
- Tank fuel level too low
Terminal condition: none
Voltage condition:
- Electrical system voltage > 10 V
Temperature condition:
- Coolant temperature > -20 °C
Time condition:
- None
Other conditions:
- Engine on

Condition for fault memory entry
The diagnostic fault code is logged when a specific number
of combustion miss events, with their negative effects on
exhaust emissions, are recognized within 1000 crankshaft
revolutions. This must proceed in 4 intervals.

Action in service
- Check fuel level

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: off
- US emissions warning lamp: off
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- The diagnostic fault code is logged to avoid extensive fault
diagnosis.