22 32 001 Replacing Rubber Mount For Gearbox Mounting

22 32 001 Replacing rubber mount for gearbox mounting (AWD)

Special tools required:





Necessary preliminary work:
^ Remove complete exhaust system
^ Remove transmission crossmember.

Necessary preliminary work:
Lower transmission with hydraulic lifter.





Mount special tools 22 1 042 /22 1 041 on transfer box.

Pull out rubber mount with thrust plate 22 1 043 by means of spindle 33 4 460 and nut 22 1 017.





Installation note:
Pay attention to installation position of rubber mount (1).





Bolt special tool 22 1 044 to transfer box.

Insert special tool 22 1 046 with bolt into recesses of rubber mount.

Draw in rubber mount with special tool 33 4 460.

Installation note:
Auxiliary installation material - low-surface-tension water.

Do not coat rubber mount with grease.