33 55 000 Removing and Installing/Replacing Rear Anti-Roll Bar

33 55 000 Removing and installing/replacing rear anti-roll bar





Necessary preliminary tasks:
^ Remove both anti-roll bar links from anti-roll bar





Release screws (1).

Tightening torque 33 55 1AZ.

Installation:
Replace screws.

Turn anti-roll bar (2) and remove sideways.





Installation:
^ Check both rubber mounts for damage and replace if necessary.
^ Pay attention to correct installation position when installing anti-roll bar..
^ The bend of the anti-roll bar must point upwards in the anti-roll bar to anti-roll bar link area.