31 35 000 Removing and Installing/Replacing Front Stabilizer

31 35 000 Removing and installing/replacing front stabilizer





Necessary preliminary work:
^ Remove front underbody protection.
^ Remove both anti-roll bar links from anti-roll bar.
^ Remove F12/F13: stiffening plate.





Release screws (1).

Tightening torque 31 35 1AZ

Remove anti-roll bar (2) downwards.





Installation note:
Replace screws.

Pay attention to installation location of retaining bracket and mounting plate!
^ Nose (1) on retaining bracket must point left in direction of travel
^ Curve (2) on lower mounting plate points to rubber bearing