26 11 051 Replacing Flexible Disc For Front Propeller Shaft

26 11 051 Replacing flexible disc for front propeller shaft





Necessary preliminary work:
^ Remove propeller shaft at transmission and centre bearing.

Note:
To protect universal joints, tie back propeller shaft in area of centre mount.





Release screws and remove flexible disc (1) from propeller shaft.

Important!
Replace ZNS bolts and self-locking nuts.

Tightening torque and angle of rotation 26 11 2AZ.

Installation note:
- During Installation arrows (2) on circumference of flexible disc must point to flange arms (3).





Installation note:
Check centering mount.

Replace damaged centering mount.

Grease centering mount.

�O#: