13 54 020 Removing and Installing/Sealing Right Throttle Valve Assembly

13 54 020 Removing and installing/sealing right throttle valve assembly (N63)







Necessary preliminary tasks:
- Switch off ignition.
- Remove right intercooler.







NOTE: Picture shows the left throttle valve assembly, the procedure for the right side is identical.

Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque 13 54 1AZ.
Remove throttle valve assembly (3).

Installation:
Check plug connection (1) for coolant remnants. If necessary, clean plug connection (1) with compressed air.







Installation:
Replace sealing ring (1) of throttle assembly (2).







Installation:
Check stored fault message.
Now clear the fault memory.