Removing and Installing/Replacing Four-Bar Lever on Left or Right Rear Seat Backrest

52 25 018 Removing And Installing/Replacing Four-bar Lever On Left Or Right Rear Seat Backrest







Necessary preliminary work:
- Remove rear head restraint
- Move backrest as far forwards as possible







NOTE: For purposes of clarity, the following operations are shown in the released state.

Detach cover (1) from Velcro fastener.
Pull cover (1) upwards out of guide from four-bar lever.







Installation note:
Make sure cover guide is correctly seated on four-bar lever.







Unscrew nuts (1).

Installation note:
Replace nuts (1).

Tightening torque 52 25 04AZ.







Release screws (1) and remove four-bar lever (2).

Tightening torque 52 25 06AZ.
Remove control unit.
Remove pump.