51 71 346 Removing and Installing / Replacing Right (Rear) Suspension Crossbrace.

51 71 346 Removing And Installing/Replacing Right (Rear) Suspension Crossbrace.







IMPORTANT: Driving without the suspension crossbrace is not permitted. (risk of damage to the body).







Release expanding rivets (1) and remove cover (2).

Installation note:
Replace damaged expanding rivets.

Holder of cover (2) must snap into place in suspension cross-brace during installation.







Release screw (1).
Tightening torque 51 61 1AZ.
Remove suspension cross-brace (2).

Installation note:
Make sure suspension cross-brace (2) is in correct installation position.
Replace screw (1).

>q/�Lq/: