66 51 030 Removing and Installing/Replacing Camera For Lane Departure Warning

66 51 030 Removing And Installing/replacing Camera For Lane Departure Warning







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Expand two-part mirror base cover (1) by pressing from below and detach.
Feed out two-part mirror base cover (1) and remove.

NOTE: Catches of two-part mirror base cover (1) must not be damaged.







Slide camera (1) in direction of arrow out of mounting.
Disconnect plug connection (2).

Installation:
Make sure camera (1) is firmly seated in mounting.

Replacement:
Carry out calibration via BMW diagnosis system:

Service functions:
- Body
- Lane departure warning
- Calibrate camera